About that spider...

So, I led off the last post with a suggestive title about a spider, but didn't explain. I was pretty bushed when I wrote it and decided I get back to it later.

Here we go:

In the wee hours of Saturday morning, sometime around 3:00am, Nancy and I were fast asleep when we were jolted awake by the piercing wail of the fire alarm. In a flash we'd opened windows in case there was an accumulation of CO (which our units detect, along with smoke). We didn't smell any smoke and couldn't sense anything suspect in a quick survey. The alarm stopped in a few seconds.

We then spent a short time locating the written directions that we'd stored away. Nancy rooted around out in the yurt and found it. Upon examination we discovered it was the Spanish edition. Caramba! No sign of the English version.

Next up we found our model on the Internet and we're able to understand the blinking red light next to the "smoke" label. A push of the button cleared the unit back to green. While up on the ladder examining the detector I noticed a small brown spider perched in one of the small openings to the interior. Nancy had read through the various possibilities for a false alarm and among them was the presence of insects. It seems this little critter was the source of our troubles.

The electrical code requires hard wired alarms on each floor of the house and there is a battery in each unit in the event of power outage. Because we have a boiler and propane gas cook top in a very tightly built house we had Felton install CO/smoke alarms on each floor although the requirement was something less, perhaps only a CO detector in the vicinity of the boiler and smoke alarms in other areas.

I tried to get the spider but had no luck. As far as we can tell, he or she is still there and I'm not sure what we're going to do about it. This event got me wondering if there might be a fine-mesh screen around the alarm that wouldn't interfere with it's function. I'm going to write the manufacturer and ask about that.

We had a spider

Morning light on the stairs

A few more small parts and we'll be done for the short term in the kitchen

Another view of the stairs

Hooking up the sink and dishwasher plumbing

My efforts have continued in the kitchen the last few days, mostly hooking up the plumbing, making a back splash for the counter and enclosing/installing the dishwasher. Once the dishwasher was in and a last little bit of cabinet filler was installed on it's right side, we were able to move the refrigerator in from the yurt and finally have all our major appliances and fixtures in and operating. It is not much short of a miracle once again to be able to get water, heat it, make coffee and have refrigerated cream all right in one place and easy to access. I know it's normal and all that, but we've lived for a long time with water out of buckets and all that and now it's just so easy; it almost feels like some sort of embarrassing luxury.

One more coat of finish on the cabinet doors and drawer fronts and we'll call the kitchen "done", at least for a short while. I'll be building an island as soon as we are finished with our obligations to the bank, which should be soon.

Adam finished up a few days ago and now I'll be on my own finishing up the last few projects before we call it good.

Fun stuff

The sink looking all tidy with fixtures and an mineral oil finish on the counters. Note plumbing pieces in the cabinet underneath--water will not be flowing until tomorrow

Fitting the counter and creating necessary openings

This is the counter upside down--making the cut away that goes over and around the lip of the sink

Shaping the opening for the sink. The curved piece in back is a template that I used to router the curved edge

The last two stairs in place. Adam did a really nice job here

I've been working hard on the counter top project, which naturally leads into installing the sink, plumbing the supply lines, and hooking up the dishwasher. It all dovetails as the work progresses.
Shaping the counter tops was careful work and took some time, but it's looking excellent and fitting really nicely, so I am quite pleased. I spent most of today on the plumbing work and tomorrow I should have it all operating. Having our sink, stove, diswasher and fridge all hooked up and running will be monumental.

Adam came back yesterday evening and started up again today. He installed the last two stairs and they look great. Signs of finish everywhere!

Saturday stuff

I was the recipient of an iTouch for Christmas and today I downloaded a free paint app. This is what I came up with

The counter top complete. Next up sanding and final shaping for installation

Messing around with railing ideas

Some of the cabinet doors Nancy is working on

Today was sort of a half-hearted effort on my part as I was sleepy and in need of a nap so I didn't get too much done. Nancy on the other hand has been powering through finish work on the cabinet doors, drawer fronts and cabinet frames. It's all looking really nice. Particularly with stuff like the doors its a lot of work to sand between each coat, but she's making good headway and should have it all ready to go in couple more days.

I completed the counter tops last night and today started in on sanding them down to smooth. Its not so hard as it is a matter of patience just sanding sanding sanding. They're gonna look good when they are done.

Checking for square

The first two pieces joined

There's a lot of clamping, drilling, gluing and screwing in this process

Checking for square. You can see the overlap pattern at the corner. You can also see the first counter section that I built sitting in place on the cabinet--it still needs to be trimmed and sanded before installing

This is my little sketch that sort of shows the plan. There's a gap where the sink will be

The work at the end of the day. I should have the rest built up tomorrow

Today I started building up the second section of maple counter top. This one is a little more complicated then the one featured in the last post, since it encompasses the corner of the cabinetry. Usually, counter tops that turn a corner and cut at a 45 degree angle and joined. In our case we are going to build the corner into the counter as a unit. Adam had the excellent suggestion to "every other" the pieces coming in from each angle and sort of make a weave pattern at the joint.

It's important that the whole thing maintain a nice 90 degree angle so it'll fit into the corner well when its done and I'm glad to say that seems to be working out pretty well.

Maple counter, Cherry landing

Scraping glue drips off the maple counter top

The glue-up process

Adam admiring his work having just put down a coat of poly on the stair landing floor

Today I built up the first section of maple butcher-block style counter top. The process requires drilling out the pieces one-by-one with two different size bits, putting in an anchor screw, taking the screw back out, gluing both boards and then putting them together with screws--about eight holes to a strip of maple. It took quite a long time to build up the section I made today, but that's how it goes. I'm very happy with the result. All that's required now is to trim it to fit and install it.
Tomorrow I'll be working on the section that goes around the sink and turns the corner on the cabinets. It'll be a little more complicated, but after today's work I'm feeling confident about it.

Meanwhile Adam installed the cherry floor on the landing located halfway up the stairs. They look great.

Day by day

Envisioning how I be fastening the maple pieces together for the countertop

The ripped stack of maple

The arced bottom step. The next one up will be similarly arced, although you can tell that from the photo

Adam cutting the radius on the bottom step

Adam is at work shaping the last couple of steps coming down the stairway. These are distinct because the leading edge is curved and they have curved risers underneath coming up to meet them. It took some effort but now they are off to the paint shop (a couple of sawhorses upstairs) for their finish work and then they'll go in soon to finish off the stair project.

I've been working on the counter top project and am making good headway. I took a bunch of 2" x 8" x 8' maple boards, planed them to smooth and then ripped them down into 1 3/4" x 1 3/4" pieces that again had to be planed. The next step is to cut them roughly to length and start gluing them into counters. I'll be doing that tomorrow.

A sign of near completion? Today the technician from the gas company came and hooked up our gas cooktop. We can now cook in our home. Whoo hoo!