The Desk

The new desk

The storage cabinet closed. Inside is the printer, modem and power strip

The inside of the storage cabinet

Note the arrangement for holding the various cables in place under the desktop. They are easily disengaged if need be.

Detail from one of the cabinet side panels

The office desk is nearly done. We are waiting on a little more hardware and there are a couple of tweaks here and there, but the big stuff is done and in place. I used cherry wood throughout.

You might recall from a previous post that Nancy and I came up with the design by creating a mock-up to test out the arrangement. From there I translated that into a plan for two cabinet bases, a large desk top and a "wing" that slots into the desk and provides good work space and views for Nance, who spends lots of time working at this desk. She's managed with some pretty rudimentary set-ups in the past, so its nice to create something that sets her up well.

The right hand cabinet is a conventional set of drawers; the top one is a simple drawer and the bottom one is a file cabinet sized arrangement.

The left hand cabinet looks like a matching cabinet with drawers but in fact serves as storage for the printer, the power strip, and the modem. The side of the cabinet opens to reveal the stuff inside but doesn't look like a door.

The wing is designed to easily come off so that we can have space to set up a bed in the office when we want to make it into a guest room.

When I was working out the plan, Nancy challenged me to come up with something clever for sides of the cabinets and I was sort of stumped. After tossing around some ideas I decided to stamp the side panels with letters and numbers--the idea being that desks, cabinets, printers and the like are pretty much about generating and holding letters and numbers. The result is subtle, but I'm pleased with how it came out.

A bonus is the keyboard drawer which I picked up the at the state of Vermont salvage store in Waterbury. It is versatile, easy to use, and very solid; a new version of this mechanism would cost over $100. It was a good catch at $10.

When the drawer slides arrive I will build a slide out base for the printer so it'll be easy to load up paper. The drawer pulls will be in that same order and installing those will round off this part of the project. Yet to come are an upper shelving unit along the back of the desk for storage and such. That'll be easy compared to the desk and cabinets.

The Island

Our new old island

The hold-all box. We keep oils and such in there

The maple work surface and cherry shelf on the stainless base

It's always been our plan to build a kitchen island to round out the space and utility of the room and give the area a gathering point. Up till now it has felt a little too spacious because there has been that central piece missing. So it was something of a coincidence that my sister called us up and asked if we'd be interested in borrowing their old kitchen island for the indefinite future as they work on selling their current home and make plans to build a new house.

We jumped on the idea because although we fully intend to create an island when the time comes, its not currently at the top of our list since the kitchen is functional enough without it and things like shelves, screen doors, and places to store our clothes are a bit more pressing.

So, I went over earlier this week and picked it up and my 4 year old niece Solveig helped me load all the parts into the car.

It is turning out to be a really great addition to our home and I said to Randy on the phone after we'd got it in place that our motivation to go ahead and build our island just decreased by about seventy-five percent. It matches the wood types we have in our kitchen: a maple countertop/cutting surface, and a cherry shelf that matches the cherry cabinets. It fills out the general area of the kitchen really nicely and answers to what was a significant missing element in our overall plan.

Randy had this island put together after asking a restaurant supply house if they had a metal base that might work as an island and Liza found the cutting board at a yard sale, although it was a little to short to fill the full length of the base, so they had their friend Johnny built them a hold-all box to fill out that remaining space, along with the cherry shelf down below. I would never have thought to put in a box like that, but its great. It keeps the stuff you use all the time right in the middle of things and keeps the work/eating area of the cutting board clear.

The island also gives our groovy industrial stools something to gravitate around. They fit together well with the style of the the island.

Maple counter, Cherry landing

Scraping glue drips off the maple counter top

The glue-up process

Adam admiring his work having just put down a coat of poly on the stair landing floor

Today I built up the first section of maple butcher-block style counter top. The process requires drilling out the pieces one-by-one with two different size bits, putting in an anchor screw, taking the screw back out, gluing both boards and then putting them together with screws--about eight holes to a strip of maple. It took quite a long time to build up the section I made today, but that's how it goes. I'm very happy with the result. All that's required now is to trim it to fit and install it.
Tomorrow I'll be working on the section that goes around the sink and turns the corner on the cabinets. It'll be a little more complicated, but after today's work I'm feeling confident about it.

Meanwhile Adam installed the cherry floor on the landing located halfway up the stairs. They look great.

Cabinets and Trim

Adam at work on the casing around the pocket doors

Lining up the forstner bit with the pilot hole

Drilling the mounting hole

Doors in place. Notice the red line at the top -- I've yet to adjust these doors so they all line up level

Here I'm using the laser to sight the height line for the drawer slides, one of which is mounted on the left

I've been working on the cabinets, specifically the doors and the drawers. Having never before built cabinetry in any real way I've felt trepidatious at some of the critical junctures. One of those junctures is marking, drilling, and mounting the doors. I spent a good bit of effort to make a couple of jigs that allowed me to make accurate marks for drilling. I tested one door before deciding that my jig was going to work and then after it worked fine went ahead and did the rest. The doors are all mounted with what are known as "European" hinges. They are quite common these days, but used to be somewhat exotic. The beauty of them is that they allow for adjustments in three directions (or more on some models), so if your doors are not all quite straight or a little off center or whatever, you have some room to correct.

I also mounted the slides for all the drawers and that went fine too. Actually, what made it really easy was Adam's laser level. I set it up, found my height and the laser shone its horizontal beam into all the bays of the cabinets and I was able to mark all my drawer heights super accurately. The alternative would have been cumbersome and of dubious accuracy. Hooray for laser levels!

Tomorrow I'll mount the drawers and then make the drawer fronts and finish the cabinet face frame inbetween the doors and drawer fronts. When I get to that point I'm basically done with the major work on the cabinets and will then been getting ready to build the maple countertops.

Working alongside me this week, Adam has been building the framed door passages at both the exit doors and between the office and living space, which is the wall that houses the pocket doors. He's done some nice work and these things all look like pieces of furniture. He'll probably have all the doors trimmed out tomorrow and then be on to running the baseboard that connects it all together.