Saturday, November 24, 2012

Stair Railing, Pt. 2

I started off wanting to install a railing down the stairs from the second floor to the first, but was delayed slightly by needing to rebuild a section of upstairs railing before I could start to piece together the actual stair rail. With that now complete, I spent some time crafting the railing.

First off I needed to pencil  the height of the completed rail on the wall and then mount the handrail brakets that the railing will sit on when installed. We purchased some nice vintage reproduction brackets from Lee Valley.

One of the rail brackets. I find them really beautiful, but as is the lot of a rail bracket, it is mostly hidden from view behind the railing itself

With the brackets installed I then built up the rail pieces themselves. I had planned to continue the railing detail around the opening on the second floor down, but Nancy said it was way too big.  I then  sized the whole assembly down and it is much better now--easier to grasp and a gentler profile all around.

The junction of the two runs of rail where they meet at the landing


This is where the (newly extended) section of stair opening railing meets the rail that goes downstairs. I'm still not sure how these two are going to connect

The intersections where the railing sections meet are the challenging part since they are coming in at an angle and then making a turn or (in the case where the upstairs railing meets the stair rail) turning, dropping, and then turning again.  I knew the only way I'd be able to work this out was to build everything long and then make fitting decisions where I could actually see the relationships.

That is the next step: work out the connections between the two runs of rail and then sort out how I want to finish it where it enters out into the living room on the first floor. Should it be simple and unadorned and just end at the opening? End in a decorative curl atop a post? Hmm... I enjoy visualizing this kind of thing.

1 comment:

Elizabeth J. Neal said...

I choosestainless steel for its safety and durability. Read more here