Saturday, November 19, 2011

Second Coat


Before...
... and after

Over the last couple of months I've been slowly working away at giving the house a second and final coat of paint (technically stain, but seems like paint in practical terms) and I'm rounding the corner literally and figuratively on the project.

In September I decided to start at the porch and then work around the back of the house, figuring that I'd cover the cooler parts of the house while it was still warm and then be painting the sunnier sides as the fall progresses. This has turned out to be a wise tactic as we are now in late November and all that's left is part of the south-facing wall.

Progress has been in fits and starts. Hurricane Irene was the first unexpected event that redirected much of our time and attention to helping others over the course of a couple of weeks. Then came teaching an intense two-week course at Yestermorrow, followed last but not least, by a brief stay in the hospital resulting from a cat bite.

Nonetheless, I've been making progress as time and weather have allowed and in this respect, I think we've been quite lucky. The stain requires 40 degrees or above for application, so I've been able to work with very few exceptions right up through the fall.

Our original plan --which we are working to complete-- was to have all the clapboard primed by the factory, then apply a first coat of primer before the clapboard was installed, and then finishing up with a final coat when the siding was in place. Although the house has generally looked finished for a good while now, much of the rafter tails hadn't even been primed, much less painted, and all the nail holes and clapboard butt-joints were rough.

It feels good to know that we're seeing this part of the project through to insure the quality and durability of the siding.